Basically it may weaken solder contacts and with reflow you can fix it. Hope this help someone who need some info." Sorry for my English (google translator). Only need to press the power button for a minute or more. It worked for my notebook Asus Q550L, but I suspect all about Asus UEFI boot. Because reflow solution may work only if you have any overheating issues with GPU. To solve it have to do what he says "penplez05", but, WITHOUT DISCONNECT NOTHING. Hey guys i tried to update my bios to 3402 using the EZ update feature inside AI Suite 3.All seemed fine and i even changed the logo but when i accepted the restart it just shutdown?? Isolated this chip by covering other electronic components by using alufoil with capton tapes. Heated GPU using hot air gun by monitoring the temperature. Needed to heat it up to 220deg celcius and maintain it for 1-2min. If you don't have the technical expertise, I suggest you bring your laptop to an expert computer technician. reposting Dhanushka_Liyanage solution: "I had similar problem with Asus K43Jr model. HDD worked only for few seconds and HDD LED went off.
I am having similar problem with my ASUS laptop A43SD after flashing to new bios version 208 using the EZ flash ultility in the CMOS. after taking the DC power supply out and unplugging the AC power supply ; hold main power button down for 2 minutes. and then pushing power button again like a nornal turning on process and it worked out!
Then try to turn on the device using only the charger ( do not attach the battery). Otherwise, open up the bottom casing of your laptop where you can see Hard drive and RAM units. If it didn't work either, then it may be the RAM slots causing this problem. The start screen appeared so I was able to eliminate any problem with the screen itself. (Read temp profile for chip for more accurate info) 8.
This problem is related to RAM units First you should turn off your device, unplug the charger and remove the battery Then hold the power button for at least 30 seconds. I disconnected the hard drive then booted up the laptop. Isolated this chip by covering other electronic components by using alufoil with capton tapes. Heated GPU using hot air gun by monitoring the temperature. Needed to heat it up to 220deg celcius and maintain it for 1-2min.
The last time i updated my bios i had no problems and i am sure it was thru the software? I left it for a while and restarted and it took an age to post plus it hadn't changed the logo and on checking when i eventually got into my desktop i was still on 1701?? TIA If you cannot use the Flashback method I'd recommend the EZ Flash method from inside the UEFI - you don't even need any kind of USB-Stick, a (non-raid) partition formatted with NTFS/FAT32 will do just fine.
I can't use the usb feature on the back due to disability and being on my own. The inside OS updating, as Detleg stated, is just ... really really bad, and most of the times not even working.